NMFC Freight Class Guide and Codes Explained

Illustration of cartons on a pallet next to a measuring scale and a freight class 70 badge

Key takeaways

  • Freight class is a rating from 50 to 500 in the National Motor Freight Classification that LTL carriers use to rate a shipment, and it is unrelated to DOT hazard classes.

  • Find the NMFC item number for your product first, because the item decides whether density matters and which class or subprovision applies.

  • For a density-based item, density is weight divided by cubic feet of each handling unit as tendered, read against the density scale written into that item.

  • An item on the 13-sub scale never rates at class 77.5, 110, 150, 200 or 500, so an 18-row density chart is not a lookup for your freight.

  • The NMFC sets no rates: the carrier's tariff or your pricing agreement sets the price, and a carrier's rules tariff can override NMFC provisions and cap liability per pound by class.

  • Medical and lab products need their own item lookup in ClassIT+ or an NMFTA interpretation, since form, packaging and hazmat status change the item.

Freight class is a number from 50 to 500 in the National Motor Freight Classification (NMFC). Less-than-truckload (LTL) carriers use it to rate a commodity. To find yours, look up the NMFC item number that describes your product first, then measure density only if that item calls for it.

A class read off a generic chart is a guess. For pharma, biotech and lab freight, the item description, the packaging as tendered and the carrier's own rules tariff decide what you are billed.

What is freight class?

Freight class is a rating that groups commodities by how hard they are to move as LTL freight. The National Motor Freight Traffic Association (NMFTA) publishes the NMFC, and its help center defines freight class as a range from 50 to 500. Four transportation characteristics set it: handling, stowability, liability and density. Dense loads that handle and stow without trouble get lower numbers, and light, awkward or damage-prone loads get higher ones.

The class belongs to LTL shipping, where your pallets share a trailer with other shippers' freight. Mercury's page on less-than-truckload shipping describes that consolidation. A box that moves through a parcel network is priced another way, and freight vs small package shipping explains where the line usually falls.

Freight class is not a hazard class. A "class 70" pallet and a "Class 7" radioactive shipment come from two unrelated systems. The Department of Transportation (DOT) nine classes of hazardous materials have nothing to do with NMFC ratings.

What is NMFC freight class?

The class printed in an NMFC item, the entry that describes a commodity and how it ships, is its NMFC freight class. NMFTA describes itself as a membership-based nonprofit, not a government body, and calls the NMFC a voluntary standard.

The NMFC sorts commodities into 18 separate classes between 50 and 500. It sets ratings, not prices. NMFTA's classification procedures say the NMFC contains no rates or charges and does not suggest them.

How do freight classes work?

Each commodity is scored on four characteristics, and its class reflects the combination. NMFTA's criteria for each characteristic read as follows:

  • Density: the weight of a handling unit per cubic foot of space, measured as tendered.

  • Handling: size, weight, shape, hazardous nature or fragility that calls for special care on the dock.

  • Stowability: loading limits such as hazmat co-loading bans, excessive weight or length, or freight nothing can be stacked on.

  • Liability: susceptibility to damage, the chance of damaging other freight, perishability and hazardous nature.

Density carries the most weight with the Freight Classification Development Council (FCDC), which maintains the NMFC. For a commodity with no unusual handling, stowability or liability issues, the FCDC treats density as "of prime importance". When a commodity does show them, the FCDC may move its class one or more classes away from the density guideline. Items classed that way carry a symbol in the NMFC, and NMFTA notes that the symbol does not change how the item applies.

The price comes from the carrier. Rates sit in each carrier's tariffs or in your pricing agreement, so the same class can cost different amounts with different carriers. What holds across them is the direction NMFTA describes: lower classes generally mean lower shipping costs, higher classes higher ones.

The 18 classes and the density scale

Two NMFTA tables link density to class, and they do different jobs. The 18-class table is the FCDC's density guidelines, which the council uses when it assigns classes to commodities. For a density-based item, the table that rates your freight is the scale written into that item. Docket 2025-1 moved items from the older 11-subprovision scale to the FCDC's standard 13-subprovision scale, and the docket's changes took effect on July 19, 2025.

Compare the two columns before you trust any chart that lists 18 density bands as a lookup:




Class


FCDC guideline: minimum average density (pcf)

13-sub scale: density band (pcf)

50

50

50 or greater

55

35

35 to under 50

60

30

30 to under 35

65

22.5

22.5 to under 30

70

15

15 to under 22.5

77.5

13.5

Not on the scale

85

12

12 to under 15

92.5

10.5

10 to under 12

100

9

8 to under 10

110

8

Not on the scale

125

7

6 to under 8

150

6

Not on the scale

175

5

4 to under 6

200

4

Not on the scale

250

3

2 to under 4

300

2

1 to under 2

400

1

Under 1

500

Under 1

Not on the scale

Density is in pounds per cubic foot (pcf). An item on the 13-sub scale never rates at class 77.5, 110, 150, 200 or 500. Freight under 1 pcf rates at class 400 there, not 500.

Classes 50 and 55 were not new in 2025. NMFTA's answer on the new structure shows the change added density bands for classes 60, 55 and 50 at the top of the scale.

NMFC codes: item numbers and subprovisions

An NMFC code is the item number of a commodity description, and the class comes with that item. Some items carry one class. Others split into subprovisions, which NMFTA describes as a way to evaluate a commodity's transportation characteristics further. Each sub can cover a density band, a value range or a form of shipment.

Item 58770 shows how this reads in practice. NMFTA's public Docket 2026-1 analysis for drugs and medicines lists it as drugs or medicines not otherwise indicated (NOI), with 13 density subprovisions. Sub 9 of that item means 15 to under 22.5 pcf at class 70. The description also names the packaging the class assumes, such as boxes, drums, pails or intermediate bulk containers.

The same item does not apply to materials that DOT requires to bear a hazard class label or placard. Those take other provisions in the classification. A product name alone, without its form, packaging and hazmat status, cannot settle the item.

Access to the full classification is not free. NMFTA makes the classification available to ClassIT+ subscribers and NMFC Book purchasers. For July 1, 2026 to June 30, 2027, NMFTA lists the printed book at $321 for members and $484 for non-members.

How to determine freight class?

Start from the product description, find the NMFC item, and only then weigh and measure:

  1. Describe the product as it ships: what it is, what it is made of, what it does, and whether it is assembled, knocked down or nested.

  2. Search for the matching item in ClassIT+ or the NMFC Book. NMFTA recommends searching for specific words to find the product.

  3. Read the whole item: one class or several subprovisions, the notes, and the packaging it requires.

  4. If the item is density-based, weigh and measure each handling unit as you will tender it.

  5. Put the item number, the sub and the commodity description on the bill of lading.

The first step carries the most weight, because two products with the same weight and size can sit in different items. The item then decides whether density matters at all.

How do I determine freight class?

You can determine it yourself when you have ClassIT+ or the NMFC Book and can describe the product precisely. Without either, NMFTA's interpretations team will classify a product on request, and NMFTA routes these requests through the NMFTA Store.

The team asks for specific facts, starting with the manufacturer's description and model number. It also wants photos, the product's function, the package type, the form of shipment and the materials. Hazardous materials need a safety data sheet. Collect that file before you ask a carrier or a third-party logistics provider (3PL) for a class, since each needs the same facts.

How to determine freight class for LTL?

For LTL, the class that holds is the one the carrier can confirm from your bill of lading and from the freight on its dock. XPO's rules tariff, effective August 17, 2026, is one carrier example. It requires proper commodity descriptions on the bill of lading and says a class number with an incomplete description does not set the class.

When the description is not enough to identify the goods, that tariff rates the shipment at class 150 first and may inspect it. It also says its own rules supersede conflicting NMFC provisions. Every carrier publishes its own rules tariff, so read the one for the carrier you book.

How to calculate freight class?

Divide weight by cubic feet to get density, then find that density in the bands of your NMFC item. NMFTA's density best practices set out the method. Multiply the greatest length, width and height in inches, including any projections, and divide by 1,728 to get cubic feet. Then divide the weight as tendered by that cube.

NMFTA's own example is a 48 x 40 x 45 inch pallet weighing 450 lb: 86,400 cubic inches, 50 cubic feet and 9.00 pcf. For your own pallets, Mercury's cubic feet and density calculator runs the same steps. NMFTA's free basic calculator also shows density only, so you still need the item to get a class.

Stack height alone can change the result. The first and last rows below are hypothetical and keep NMFTA's 450 lb pallet, changing only its height:





Pallet (inches)


Cubic feet

Density (pcf)

Class on the 13-sub scale

48 x 40 x 38

42.22

10.66

92.5

48 x 40 x 45

50.00

9.00

100

48 x 40 x 52

57.78

7.79

125

Cubic feet and density are rounded to two decimals, and each class was read from the unrounded density. Seven inches of extra height moves this pallet from class 100 to 125. The result holds only for an item that uses the 13-sub scale. An item with a fixed class ignores density.

Shipments of several pallets follow their own rule. NMFTA quotes the NMFC rule that density is calculated on each handling unit. Where shipping papers show only a total weight, total weight over total cube may be used instead.

NMFC code lookup: ClassIT+ and other routes

ClassIT+ is the NMFC code lookup NMFTA itself maintains. NMFTA calls it "the official digital version of the NMFC". It debuted on July 15, 2025, four days before the Docket 2025-1 changes took effect.

A subscription gives item search, density calculators and each item's recent history, which ClassIT+ tracks for items from 2025 forward. A canceled item number shows a "Replaced" icon next to the new number.

The printed NMFC Book and an interpretations request are the other official routes. The public docket files show proposed changes before they take effect. Third-party "NMFC code lookup" tables are not the classification itself. Check any item number they give against ClassIT+ or the book before it goes on a bill of lading.

Reclassification and inspection risk

Reclassification happens when a carrier finds that the class or density on the bill of lading does not match the freight and re-rates the shipment. NMFTA warns that if a carrier moves freight to a higher class, the shipper may incur additional charges. In the XPO tariff, any shipment may be inspected, and a correction to density, value, cube or classification can add a correction fee. Freight and fuel charges are then re-rated.

Class can also cap what a carrier pays after loss or damage. The same XPO tariff limits liability per pound by NMFC class unless the shipper declares excess value and pays for it. The cap runs from $3.00 per pound at class 50 to $5.00 for class 65 and above. For a lab instrument or a pallet of high-value product, check declared value before you book.

Reclassification risk starts at the dock. NMFTA's NMFC page asks shippers to use accurate weights and dimensions, never estimates. Measure the greatest dimensions, including the pallet and any overhang, and keep the measurements and photos with the shipping record.

Keeping NMFC item numbers current

NMFC items change through dockets that the FCDC votes on, and approved changes take effect through supplements. NMFTA described the July 2025 update as only the first phase of a larger overhaul.

As of November 13, 2026, NMFTA's key dates page lists Supplement 2026-2 as effective on December 12, 2026. The NMFC Book 2027 takes effect on January 23, 2027. Re-check the items you ship most often against each supplement, and update any quoting tool or shipping system that stores item numbers.

Freight class for medical and lab shipments

No class is safe to assume for a medical or lab product. The item depends on what the product is, its form and its packaging. Pharmaceuticals show why.

Docket 2026-1 proposed canceling 21 medicine-related items, among them aspirin and intravenous solutions, with reference to density-based item 58770. The FCDC's density study for those items counted 26,849 density observations. They averaged 23.18 pcf, with a peak in the 15 to under 22.5 band.

That docket was a proposal. Check its disposition and the current item in ClassIT+ before you rely on it. NMFTA's analysis found no unusual handling, stowability or liability issues. It still warns against stowing these goods with hazardous materials or freight that could contaminate them.

Packaging for temperature control changes the numbers you measure. NMFTA's density guidance says density-based classes are calculated from the shipment as tendered, including packaging design and pallet configuration. An insulated shipper adds cube around the product. The same product can therefore rate differently in a passive cold chain box than in its plain carton.

Lab instruments and devices may be classed by function or construction, which is where an interpretations request with photos and materials helps.

Before you book an LTL shipment

Confirm the item number and sub in ClassIT+, the NMFC Book or an NMFTA interpretation. Then measure each handling unit as tendered and write the full description on the bill of lading. Read the rules tariff of the carrier you book, and decide on declared value for high-value cargo. For life science freight that needs this checked before pickup, Mercury's freight shipping services cover less-than-truckload and full truckload moves.

Share on Linkedin
Share on X
Share on Facebook