CITES Permits: Why Declarations Matter

CITES logo filled with wildlife photos above the Mercury Ship With Confidence logo on green

Key takeaways

  • A CITES permit is the government document that authorizes international trade in a specimen of a species listed in CITES Appendix I, II or III, including parts and derivatives.

  • Appendix I trade needs both an import permit and an export or re-export document, while Appendix II and most Appendix III trade needs an export-side document.

  • In the United States, wildlife shipments generally move through designated ports with a Form 3-177 declaration and clearance by a Fish and Wildlife Service officer.

  • A CITES declaration statement on an invoice tells customs and the carrier whether the goods contain CITES-listed material, so it must match the permits.

  • Tissue, blood and DNA directly derived from a listed species are regulated, so research and life science shipments need the same care as any other CITES shipment.

A CITES permit is the official document that allows a specimen of a protected plant or animal species, or a part or derivative of it, to cross an international border legally. If your shipment contains material from a species listed under the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES), you need the right CITES permits or certificates before it moves, and you need to declare it correctly when it arrives. That applies to research samples and life science materials as much as to wildlife products.

This guide is about understanding CITES permits in practice: what they are, how CITES certificates differ from permits, what a CITES declaration statement means on shipping documents, how declarations work at a U.S. port, and what happens when a shipment fails CITES validation. The U.S. rules referenced here are in 50 CFR Part 23, the U.S. regulations that implement CITES.

Understanding CITES permits: the importance of declarations for every shipment

CITES is an agreement between governments, in force since 1975, that controls international trade in listed species. The purpose of CITES is to make sure that international trade does not threaten the survival of wild animals and plants. CITES regulations reach every shipment of a listed specimen, which is why CITES shipping needs more preparation than ordinary freight. It works through documents. Each Party designates a Management Authority to issue permits and certificates and a Scientific Authority to advise on whether trade will harm the species. Inspectors at the border then check that the right documents travel with the goods. Declarations are the link between those two steps. A perfect permit does not help if the shipment is not declared, and a declaration that does not match the permit is one of the fastest ways to get a CITES shipment detained.

What is a CITES permit?

A CITES permit is a document issued by a national CITES Management Authority that authorizes the export, re-export or import of a specimen of a CITES-listed species. Under 50 CFR 23.20, you must have a valid CITES document to engage in international trade in any CITES specimen unless an exemption applies. In the United States, the U.S. Fish and Wildlife Service (USFWS) is the Management Authority. Put simply, what is CITES permit paperwork for? It is proof that the trade is legal and, for most listed species, that a scientific authority found it will not harm the species. A CITES export permit is the most common document a shipper meets, because Appendix II and most Appendix III trade needs one.

CITES Appendices I, II and III

The species covered by CITES are listed in three Appendices, and the Appendix decides which documents you need. Under 50 CFR 23.4:

  • Appendix I includes species threatened with extinction that are or may be affected by trade. Trade is allowed only in exceptional circumstances.

  • Appendix II includes species not presently threatened with extinction that may become so if trade is not regulated, plus look-alike species listed to help control trade in others.

  • Appendix III includes species listed by a range country that wants international cooperation in controlling trade.

Which CITES documents each Appendix requires

Appendix

Documents required (unless an exemption applies)

I

Import permit from the importing country and an export permit or re-export certificate from the exporting country

II

Export permit or re-export certificate

III

Export permit if the specimen came from the listing country, certificate of origin if it came from another country, or re-export certificate for re-exports

These are the CITES permit requirements in 50 CFR 23.20(e), and CITES restrictions are tightest for Appendix I. Keep the CITES documentation for each shipment with your customs records. Countries may apply stricter national measures, so the same regulation tells you to check with the Management Authorities of every country involved before you ship.

What is the difference between a CITES permit and a CITES certificate?

A CITES permit is issued for a standard export or import of a listed specimen, while a CITES certificate is issued for specific situations the Convention treats differently, such as re-export, specimens of a particular origin or exempt specimens. Both are CITES documents, and both must be valid and match the shipment.

Document

Used for

Maximum U.S. validity

Export permit

Export of a specimen from its country of origin

6 months

Import permit

Import of Appendix I specimens

12 months

Re-export certificate

Export of a specimen that was previously imported

6 months

Certificate of origin

Appendix III specimens from a country other than the listing country

12 months

Bred-in-captivity, artificially propagated or pre-Convention certificates

Specimens that qualify for those exemptions

As stated, up to 3 years

Validity periods come from 50 CFR 23.54, and a document is valid only if presented before midnight on its expiration date. So what is CITES certificate paperwork in plain terms, or what is a CITES certificate? It is the CITES document you use when the shipment is not a simple first export or an Appendix I import.

Who needs a CITES permit for a shipment?

Anyone who imports, exports or re-exports a specimen of a CITES-listed species, or a part, product or derivative covered by the listing, needs the CITES documents for that trade unless an exemption applies. The obligation does not depend on whether the shipment is commercial. Research, education and medical use are listed purposes on CITES documents, not exemptions from them.

Typical life science and research cases

  • Biological samples and tissue. Under 50 CFR 23.16, DNA directly derived from wildlife or plant tissue is regulated by CITES, while synthetically derived DNA that contains no part of the original template is exempt. U.S. rules also treat urine and feces as exempt by-products, though the foreign country may still require documents.

  • Primate-derived materials. Canada's food inspection agency notes in its non-human primate import requirements that all non-human primate species are included in Appendix I or Appendix II, so samples from primates need CITES review.

  • Coral-derived materials. Stony coral, including coral rock and fragments, is defined in 50 CFR 23, and products derived from listed corals need the matching documents.

  • Research specimens. CITES documents use purpose codes, including "M" for medical research, including biomedical research, and "S" for scientific use.

For human-derived materials and other U.S. agency permits that often travel alongside CITES paperwork, see our guides to importing human-derived materials and U.S. import permits. The glossary entry on animal specimen imports covers the wider picture.

Exemptions that matter for researchers

Registered scientific institutions can exchange certain preserved, frozen, dried or embedded museum specimens, herbarium specimens and live plant material for noncommercial loan, donation or exchange without separate CITES documents, under 50 CFR 23.48, if both institutions are registered and the package carries the required label. Sample collections can also travel under an ATA carnet with CITES documentation under 50 CFR 23.50. Our ATA carnet guide explains how carnets work in general.

How to apply for a CITES permit in the United States

U.S. applicants apply to the USFWS through its ePermits system or by mail. The form depends on the species and the activity. For example, Form 3-200-29 covers export or re-export of wildlife or biomedical samples of Appendix II or III species, while Appendix I or Endangered Species Act species use a different form, according to the USFWS Form 3-200-29 page. That page lists a $100 fee for a single-shipment export and allows a master file for repeat shipments.

  1. Identify the species by scientific name and confirm its Appendix.

  2. Check the CITES requirements of every country involved, including stricter national measures.

  3. Gather proof of legal acquisition and any other government approvals.

  4. Submit the correct USFWS application and wait for the permit before shipping.

  5. If you import or export wildlife commercially, check whether you also need a USFWS import/export license under 50 CFR 14.

Declaring a CITES shipment at a U.S. port

Holding a permit is only half of CITES compliance. U.S. wildlife shipments must be declared and cleared at the port. Under 50 CFR Part 14, wildlife must generally be imported or exported through a designated port, and importers or their agents must file a Declaration for Importation or Exportation of Fish or Wildlife, Form 3-177, at the place where clearance is requested. A Service officer must clear imported wildlife before CBP releases it.

Designated ports

The designated ports listed in 50 CFR 14.12 are Anchorage, Atlanta, Baltimore, Boston, Chicago, Dallas/Fort Worth, Honolulu, Houston, Los Angeles, Louisville, Memphis, Miami, New Orleans, New York, Portland (Oregon), San Francisco and Seattle. Other ports may be used only in limited cases, such as border ports, special ports or under a port exception permit.

Inspection and validation

Officers may detain and inspect any package and its documents. For live or perishable wildlife shipments, or when you request inspection on arrival, notify the Service at least 48 hours before the estimated arrival at a designated port. When a specimen is exported, the inspecting official validates the CITES document with a stamp or seal and signature, which is the step people mean by CITES validations. Plants follow separate clearance rules under 50 CFR Part 24 and USDA regulations.

What is a CITES declaration statement?

A CITES declaration statement is a line on a commercial invoice or shipping document that tells the carrier and customs whether the goods contain material from CITES-protected species. On DHL's customs invoice declarations, for example, the CITES option confirms that the shipment is not made of leather parts of animal species protected by the Washington Convention, another name for CITES. Depending on the carrier or system, the option may appear as CITES (declaration statement) or simply CITES.

Some customs and carrier forms instead ask you to flag goods subject to CITES certification, sometimes worded as a certificate of trade in endangered species. The rule for the CITES declaration is simple: it must be true and it must agree with your permits. Never select a "no CITES content" statement for goods that contain listed material, and never declare CITES content without the documents to support it. The commercial invoice should also give the scientific name, quantity and permit numbers where CITES documents apply.

CITES tags and marking

CITES tags are physical tags required on certain specimens. Under 50 CFR 23, each U.S. CITES fur skin exported or re-exported must carry a permanently attached U.S. CITES tag, and crocodilian skins, parts and products have their own section, 50 CFR 23.70. Separately, 50 CFR 14.81 requires wildlife packages to be marked on the outside with the names and addresses of the shipper and consignee, with a list of contents by scientific name.

What happens if a shipment fails CITES validation?

If a shipment fails CITES validation, inspectors can detain it, refuse clearance and, if the problem is not resolved, treat the goods as seized. Under 50 CFR 14.53, the Service sends a notice of detention, and if releasability is not determined within 30 days of the notice, or a longer stated period, the wildlife is deemed seized. It is unlawful under 50 CFR 23.13 to import, export or possess CITES specimens traded contrary to CITES, and confiscated specimens are handled under 50 CFR 23.78.

In practice, a claim rejected due to failed CITES validations or a clearance rejection usually traces back to a few causes:

  • The permit expired before the shipment was presented.

  • The species name, quantity or units on the permit do not match the shipment.

  • The export document was not validated by the exporting country's inspector.

  • The shipment arrived at a non-designated port without an exception.

  • No Form 3-177 was filed, or the invoice declaration contradicted the permit.

Common mistakes in CITES declarations and how to avoid them

1. Incomplete or incorrect documentation

Missing signatures, wrong species identification and missing shipment details are frequent causes of holds. Cross-check every field of the declaration against the CITES permit and use a checklist for each shipment.

2. Failing to update information

Species can move between Appendices and national rules change. Check the current listing and requirements for each new order instead of reusing last year's paperwork.

3. Not declaring every CITES-listed item

A shipment with several products must declare every listed specimen, including parts and derivatives. Train staff to check every line item, not just the main product.

4. Ignoring local regulations

CITES sets the minimum. Importing and exporting countries can add requirements, and other U.S. agencies may require their own permits. Work with a customs broker who knows both sides.

5. Delaying declarations

USFWS needs time to review applications, and permits have fixed validity periods. Build a timeline that leaves room for permit issuance, inspection notice and transit.

How Mercury helps with CITES shipments

For companies shipping healthcare and life science goods that need CITES permits, Mercury's licensed customs brokerage team helps coordinate the documents, declarations and customs filings so the permit, the invoice and the Form 3-177 tell the same story. For broader advice on avoiding holds with biomedical freight, read our guide to preventing customs delays in bio-med shipping.

Share on Linkedin
Share on X
Share on Facebook

From our blog

From our blog